Power that turns on by itself in seconds
Standby Generator Installation in Orem, UT for Emergency Backup
Wasatch Front windstorms have left hundreds of thousands of Rocky Mountain Power customers dark at once, some for days. A standby generator runs on natural gas or propane and starts on its own when the grid goes down. Our Orem electricians size it, set it, wire the automatic transfer switch and handle permits. Need help during an outage right now? Call our 24 hour line. Emergencies come first, and an electrician near you can often handle other standby generator installation jobs same day.
Why Utah Valley homeowners add standby power
Outages here are not just summer storms. Heavy wet snow, canyon winds and wildfire shutoffs all cut power.
- Furnaces need electricity even when they burn gas.
- Sump pumps protect finished basements during spring melt.
- Medical equipment and refrigerated medicine can't wait.
- Home offices and well pumps keep working.
On a tighter budget? A portable generator with a Generator Interlock and Transfer Switch covers key circuits.
Essentials or whole-home coverage?
Generator size depends on what you want running. We do a load review, but here is the general idea.
| Coverage | What runs | Good for |
|---|---|---|
| Essential circuits | Furnace, fridge, some lights, sump pump, internet | Most homes, smaller budgets |
| Managed whole home | Most circuits, with large loads managed so they don't run at once | Families who want normal life |
| Full whole home | Everything, including AC and electric range | Larger homes, all-electric homes |
We size by your actual loads, not a guess. Natural gas line size and meter capacity also matter.
How a standby generator is installed
A typical project involves a few trades. We coordinate the electrical side from start to finish.
Site and load review
We choose a spot that meets clearance rules and size the unit.
Permits and pad
Permits are filed and the unit is set on a pad.
Gas and transfer switch
A gas line is connected and the automatic transfer switch is wired to your panel.
Start-up and training
We test a simulated outage and show you how it works.
Generators we install and service
We work with the two names most Utah homeowners ask for.
Generac
Generac is the best-known home standby brand, with many sizes for every home.
Kohler
Kohler whole-home generators are known for strong build quality.
Regular exercise
Standby units run short self-tests. We check that they do.
Yearly service
Oil, filters, battery and transfer switch checks keep it ready.
Be ready before the next storm
Backup power works best with these upgrades.
Helpful guides from our blog
- OutagesWhat to Do When the Power Goes Out
- Panels and power100 Amp vs 200 Amp Service
Standby generator questions
What is a standby generator?
A standby generator is installed outside your home and connected to your gas line and panel. It starts automatically during an outage.
How does an automatic transfer switch work?
It senses when utility power is lost, disconnects from the grid, and switches your home to the generator. When power returns, it switches back.
Do I need a permit for a generator in Orem?
Yes. Standby generators need permits for electrical and gas work. We handle the electrical permit and coordinate the rest.
What size generator do I need?
It depends on what you want to run. We do a load review to size it right.
Can a generator run on natural gas?
Yes. Most Utah Valley homes use natural gas for standby generators. Propane is another option.
How often does a standby generator need service?
Most makers recommend regular maintenance, often yearly, plus automatic weekly or monthly self-tests.
Never sit in the dark again
We size, install and service standby generators with permits handled from start to finish.
Licensed through Utah DOPL and fully insured. Learn about our team.