Adjustable charging that fits your panel
ChargePoint Home Flex Installation Near You in Orem, UT
The ChargePoint Home Flex is a Level 2 charger you can set from 16 to 50 amps, so it adapts to the panel you have. It comes in plug-in and hardwired versions and works with most EVs. Our licensed Orem electricians install it, set the right amperage and handle the permit. We also install ChargePoint units for businesses. From an urgent emergency to planned ChargePoint work, we answer 24 hours a day and send an electrician near you, often the same day.
Plug-in or hardwired Home Flex?
- Plug-in: uses a NEMA 14-50 or 6-50 outlet. Easy to swap later.
- Hardwired: needed for the top 50-amp setting and preferred outdoors.
- Amperage: set to match your breaker during setup in the ChargePoint app.
If your panel is tight, a lower setting lets you charge without an upgrade.
ChargePoint products we install
Home and business options.
| Product | Best for | Install notes |
|---|---|---|
| Home Flex, plug-in | Most garages | Heavy-duty NEMA 14-50 or 6-50 outlet |
| Home Flex, hardwired | Full 50A charging, outdoor spots | Direct wired to its own circuit |
| Commercial ChargePoint stations | Businesses and multifamily | Planned with your site and utility |
ChargePoint issues we fix
Typical problems.
Charger set too high
Amperage above the circuit rating trips breakers.
Outlet heating up
A worn or low-grade outlet.
Wi-Fi drops
Charger can't reach the network for scheduling.
Slow charging
Setting may be lower than the circuit allows.
What we do for ChargePoint owners
Home and business charging.
EV Charger Installation
Home Flex installs set to your panel.
Dedicated Circuits and 240V Outlets
Heavy-duty 240V outlets for plug-in models.
Panel Upgrade
More capacity for faster charging.
Commercial Electrical Services
ChargePoint stations for businesses.
We are an independent, licensed electrical contractor. We are not affiliated with or endorsed by ChargePoint. ChargePoint is a trademark of its owner, used here only to describe the equipment we work on.
Charge at home or work
Related services, charger brands and nearby cities.
Helpful guides from our blog
- EV chargingLevel 1 vs Level 2 EV Charging
- Panels and power100 Amp vs 200 Amp Service
ChargePoint questions
What amperage should my Home Flex be set to?
It should match your circuit. A 40-amp setting usually needs a 50-amp breaker, for example.
Plug-in or hardwired Home Flex?
Plug-in is flexible. Hardwired allows the full 50-amp setting and is better outdoors.
Does the Home Flex work with my EV?
It uses the J1772 connector, which fits most non-Tesla EVs. Teslas can use an adapter.
Do you install ChargePoint at businesses?
Yes. We plan and install commercial stations.
Does a ChargePoint install need a permit?
Yes. We pull the permit and schedule the inspection.
Installing a ChargePoint?
We set it to match your panel and install it to code.
Licensed through Utah DOPL and fully insured. Learn about our team.